Bar, square and profile handles for modular kitchens, wardrobes, drawers and office storage. Seven standard centre-to-centre sizes and five finishes.
Loading products...
Our handles are made from stainless steel and finished to match the rest of the fittings in a room. The range covers slim bar handles, square-section handles, curved profiles and premium designs for kitchens and wardrobes.
Every design is offered in the standard centre-to-centre sizes: 96, 128, 160, 192, 224, 256 and 288 mm. The centre-to-centre distance is the gap between the two screw holes, so handles can be swapped later without redrilling.
Matt, glossy, black, PVD gold and PVD rose gold. Matt and black are the most common choices for modern kitchens; gold and rose gold suit wardrobes and feature furniture.
As a rule of thumb, use 96 or 128 mm on narrow drawers and upper cabinets, 160 to 224 mm on standard base units and wardrobe doors, and 256 or 288 mm on wide drawers and tall pantry doors. See our handle size guide for a full table.
It is the centre-to-centre distance between the two fixing holes, not the overall length of the handle. Measure the existing holes if you are replacing handles.
Yes, each handle is supplied with M4 screws suitable for standard 18 mm board. Longer screws are available for thicker doors.
Yes. Most customers order a mix of sizes in the same design and finish so a kitchen looks consistent.
The black finish is suitable for everyday kitchen use. Like any coated finish, it can mark if scraped with sharp metal objects, so avoid abrasive cleaning pads.
Send the product codes, sizes, finishes and quantities and we will quote within working hours.
